So I swapped the heads of the default batman head with the new 52 head from injustice. There was no problem during it. But when I export it as old generic format it says it works but when I open it this shows up
XPS Generic Item Error
Moderators: ObscureMemories, Runa, Love2Raid
- semory
- Site Admin
- Posts: 7755
- Joined: Sat Aug 04, 2012 7:38 pm
- Custom Rank: Kitty pu tu tu lay!
- Location: Torrance, CA
Re: XPS Generic Item Error
xps is very buggy. the bones failed to load message means xps didnt export the bone properly. most likely a parenting problem or something. upload the mesh ascii.
Re: XPS Generic Item Error
I am unable to upload the generic_item.mesh.ascii because It won't fully export so here is the two models. One is correctly positioned. So here are the two models.
http://filesmelt.com/dl/Batman_NEw_52_and_Head_Hack.zip
http://filesmelt.com/dl/Batman_NEw_52_and_Head_Hack.zip
- thePWA
- Porter
- Posts: 2416
- Joined: Sun Aug 19, 2012 2:27 pm
- Custom Rank: JOSHAUAGES v2.0
- Location: Earth circa 1999
- Contact:
Re: XPS Generic Item Error
Why don't you just XNAaral about it? He'd probably be the best one to give you the XPS answer.Lim1tD wrote:I am unable to upload the generic_item.mesh.ascii because It won't fully export so here is the two models. One is correctly positioned. So here are the two models.
http://filesmelt.com/dl/Batman_NEw_52_and_Head_Hack.zip
Stop! Waitaminute! Fill mah cup with some liquor in it!